Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
DIY TV Stand – Easy-To-Build TV Stand
Create a stylish home for your television with this simple, good-looking stand.
- Difficulty
- Easy
- Time
- 4.3–8.3 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front/Back Rail | 4 | 3/4" × 1" × 54" | — | ☐ |
| End Rail | 4 | 3/4" × 1" × 12" | — | ☐ |
| Leg | 4 | 1" × 1" × 22" | — | ☐ |
| Top Slat | 3 | 3/4" × 5" × 58" | — | ☐ |
| Base S;at | 2 | 3/4" × 7" × 56" | — | ☐ |
| Wide Shelf Slat | 2 | 3/4" × 7" × 20" | — | ☐ |
| Narrow Shelf Slat | 2 | 3/4" × 5" × 20" | — | ☐ |
| Divider | 2 | 3/4" × 13" × 17" | — | ☐ |
| Divider Trim | 2 | 3/4" × 1" × 16" | — | ☐ |
| Back Panel | 1 | 1/4" × 16" × 21" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x2 x 96" | 4 board | ☐ |
| Board, 2x2 x 96" | 1 board | ☐ |
| Board, 1x6 x 96" | 2 board | ☐ |
| Board, 1x6 x 72" | 1 board | ☐ |
| Board, 1x8 x 96" | 2 board | ☐ |
| Plywood, 3/4" x 24" x 48" | 1 board | ☐ |
| Plywood, 1/4" x 24" x 24" | 1 board | ☐ |
| 1 1/4" coarse-thread Kreg Pocket-Hole Screws | 100 each | ☐ |
| 1-1/4" 18-gauge brad nails | 20 each | ☐ |
| 1/4" shelf pins | 8 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.