NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Add an extra desk to any space with this easy to build folding desk.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg top | 2 | 1" × 3" × 19" | — | ☐ |
| Angled leg | 2 | 1" × 3" × 29" | — | ☐ |
| Back leg | 2 | 1" × 3" × 25" | — | ☐ |
| Desk back | 2 | 1" × 3" × 37" | — | ☐ |
| Desk top | 4 | 3/4" × 5" × 43" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x4 96" | 3 board | ☐ |
| Board, 1x6 96" | 2 board | ☐ |
| 2 1/2" pocket hole screws | 8 each | ☐ |
| 1 1/4" pocket hole screws | 15 each | ☐ |
| 3" T-hinges | 4 each | ☐ |
| Gatehouse catch | 4 each | ☐ |
| Wood glue | 1 each | ☐ |
| #8 1" wood screws | 24 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
From the leg top boards, draw a round over on the front corner. Using a jig saw, cut the curve on the front of the leg tops.
For the angled legs, cut the ends of the boards off at a 22 1/2 degree angle so the ends are parallel. With the ends cut off the boards should be 27 5/8" long from end to end.
Sand and stain/paint the finished pieces. Don't forget to also sand and stain/paint the desk back pieces that are not attached to anything yet.
To set up the desk, unclip the catches and fold the legs of the desk together. Move to where you want to set it up and open the legs fully. Center the desk top on the legs, lining up the catches. Secure the catches to secure the desk top!
Enjoy your new work space. You can easily fold down your desk to store behind a sofa, in a closet, or under a bed until you need it. And make sure to visit me at Housefulofhandmade.com to for more things to to build!