Dress Up Rack — board plan

What to buy, and which parts come off which board.

Buy 3 boards at 8 ft.

1" × 12"

1 board · 7.2 board feet (includes 15% for knots and defects) · 80% of the boards you buy used

Board 1 · 19 5/8" left over
37 9/16"37 9/16"
1. Sides Of Rack — 37 9/16"
2. Sides Of Rack — 37 9/16"

1" × 3"

2 boards · 3.4 board feet (includes 15% for knots and defects) · 74% of the boards you buy used

Board 1 · 3 9/16" left over
39 1/8"39 1/8"12 13/16"
1. Trim For Sides — 39 1/8"
2. Trim For Sides — 39 1/8"
3. Trim For Ends — 12 13/16"
Board 2 · 45 11/16" left over
12 13/16"12"12"12"
1. Trim For Ends — 12 13/16"
2. Bottom Piece — 12"
3. Ends Of Rack — 12"
4. Ends Of Rack — 12"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1" × 12"

Board 1 · 19 5/8" left over

1" × 3"

Board 1 · 3 9/16" left over

Board 2 · 45 11/16" left over