NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A pocket-hole bunk bed scaled for 18" dolls, built from 1x2 and 1x1 stock with a full ladder and open-side guardrail — small enough to gift unfinished for a birthday paint job.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Corner posts The four tall posts shared by both bed levels. | 4 | 3/4" × 1 1/2" × 18" | 1x2 | ☐ |
| Bed level rails Front and back rails at both the lower and upper bed levels, plus the ladder-side top rail. | 6 | 3/4" × 1 1/2" × 19" | 1x2 | ☐ |
| Guardrail rails Open-side upper-bunk guardrail. | 2 | 3/4" × 1 1/2" × 14" | 1x2 | ☐ |
| Floor slats Five per bed level, supporting the doll mattress. | 10 | 3/4" × 1 1/2" × 9 1/4" | 1x2 | ☐ |
| Ladder rails | 2 | 3/4" × 3/4" × 19" | 1x1, 8 ft (or ripped from a 1x2) | ☐ |
| Corner reinforcing cleats Used as spacers/cleats during assembly per the source photos. | 2 | 3/4" × 3/4" × 19" | 1x1, 8 ft (or ripped from a 1x2) | ☐ |
| Ladder top cleat | 1 | 3/4" × 3/4" × 18" | 1x1, 8 ft (or ripped from a 1x2) | ☐ |
| Guardrail posts | 2 | 3/4" × 3/4" × 5 3/4" | 1x1, 8 ft (or ripped from a 1x2) | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2, 8 ft Corner posts, rails, guardrail, and floor slats. | 4 each | ☐ |
| 1x1, 8 ft (or ripped from a 1x2) Ladder rails, ladder cap, and guardrail posts. | 1 each | ☐ |
| Scrap hardboard, 1/4" plywood, or other sheet goods Floor slats or panel — any scrap qualifies. | 1 each | ☐ |
| Pocket hole screws or 2" countersunk screws | 40 each | ☐ |
| Finish nails, 1-1/4" | 20 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.