NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A slat-paneled trunk on bun feet — four framed 1x4 panels around a plywood base, with a mitered lid that opens for storage.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front/back frame verticals | 4 | 3/4" × 1 1/2" × 17 1/2" | 1x2 | ☐ |
| Front/back frame horizontals | 4 | 3/4" × 1 1/2" × 18" | 1x2 | ☐ |
| Front/back slats Five slats per panel, front and back. | 10 | 3/4" × 3 1/2" × 15" | 1x4 | ☐ |
| Side frame horizontals | 4 | 3/4" × 1 1/2" × 17" | 1x2 | ☐ |
| Side slats Five slats per panel, both sides. | 10 | 3/4" × 3 1/2" × 17" | 1x4 | ☐ |
| Lid frame, mitered Mitered at 45° at each corner. | 4 | 3/4" × 3 1/2" × 18" | 1x4 | ☐ |
| Lid support cleats, long Screwed under the lid frame. | 2 | 3/4" × 1 1/2" × 18" | 1x2 | ☐ |
| Lid support cleats, short | 2 | 3/4" × 1 1/2" × 15" | 1x2 | ☐ |
| Lid center panel Fill the mitered lid frame's center opening — scrap pieces cut to fit work as well as a single panel. | 1 | 3/4" × 11" × 11" | Scrap or 3/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2 board, 6 ft (Pine) | 5 each | ☐ |
| 1x4 board, 6 ft (Pine) | 6 each | ☐ |
| 1/4" plywood, cut to 18" x 18" | 1 each | ☐ |
| Bun foot wood table legs, 3-1/2" | 4 each | ☐ |
| Decorative nail heads | 1 pack | ☐ |
| Hinges and lid support hardware | 1 set | ☐ |
| Wood stain (two-tone accent) | 1 can | ☐ |
| White paint | 1 quart | ☐ |
| Pocket-hole screws, 1-1/4" | 80 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.