NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
These plans detail how to build a single sink bathroom vanity with drawer storage that fits around your plumbing.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1" × 1" × 29" | — | ☐ |
| Side Frames | 4 | 1" × 1" × 16" | — | ☐ |
| Front and Back Frames | 4 | 1" × 1" × 31" | — | ☐ |
| Drawer Dividers | 2 | 3/4" × 1" × 31" | — | ☐ |
| Plywood Side Panels | 2 | 3/4" × 16" × 23" | — | ☐ |
| Drawer Box Sides | 4 | 3/4" × 7" × 16" | — | ☐ |
| Drawer Box Fronts | 2 | 3/4" × 7" × 28" | — | ☐ |
| Drawer Box Back | 1 | 3/4" × 7" × 28" | — | ☐ |
| Middle and Bottom Drawer Fronts | 2 | 3/4" × 7" × 30" | — | ☐ |
| Top Drawer Front | 1 | 3/4" × 5" × 30" | — | ☐ |
| Faux Drawer Backer | 1 | 3/4" × 1" × 31" | — | ☐ |
| Middle Drawer Box Back Pieces | 2 | 3/4" × 7" × 8" | — | ☐ |
| Middle Drawer Box Inside Pieces | 2 | 3/4" × 7" × 11" | — | ☐ |
| Middle Drawer Box Inside Piece | 1 | 3/4" × 7" × 11" | — | ☐ |
| Drawer Bottoms | 2 | 1/4" × 16" × 30" | — | ☐ |
| Top Boards | 2 | 1" × 10" × 36" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x2 96" | 3 board | ☐ |
| Board, 1x2 96" | 1 board | ☐ |
| Board, 2x12 96" | 1 board | ☐ |
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Plywood, 1/4" Thick Half Sheet | 1 board | ☐ |
| Drawer Trim, Half Round 96" | 3 board | ☐ |
| 2 1/2" Kreg Pocket Hole Screws | 16 each | ☐ |
| 1 1/4" Kreg Pocket Hole Screws | 40 each | ☐ |
| 1 1/4" wood screws | 20 each | ☐ |
| 2 1/2" wood screws | 6 each | ☐ |
| Drawer Pulls | 3 each | ☐ |
| 16" drawer slides | 2 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.