Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
DIY Concrete and Wood Nightstand
Thanks so much for stopping by to check out the DIY Nightstand project.
- Difficulty
- Intermediate
- Time
- 4.5–8.5 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 3/4" × 2" × 29" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x6 72" | 2 board | ☐ |
| Board, 1x8 72" | 1 board | ☐ |
| Plywood, 1/2" Thick Half Sheet | 1 board | ☐ |
| Melamine, 3/4" Thick 20"x20" | 1 board | ☐ |
| 1"-1 1/4"Kreg Screws | 50 each | ☐ |
| Ball Bearing Drawer Glide | 1 each | ☐ |
| 1" Screws | 10 each | ☐ |
| Gorilla Wood Glue | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.