DIY Coastal Console Table

Make cuts according to the cut list.

Visit our site https://www.charlestoncrafted.com/diy-coastal-console-table/ for all the details including the specific cut list!

Drill two pocket holes in the ends of the Top Leg Supports, Bottom Leg Supports, and Side Braces. Drill pocket holes necessary to attach the top pieces together.

Connect the Top pieces together. Router edge for finished look.

Build the front and back of the base by attaching the Top Leg Supports to the top of the Legs, then connecting the Bottom Leg Supports to the Legs where they fit flush.

• Attach the two leg frames using the Side Braces.
• Attach them flush at the top and lined up with the Bottom Leg Supports. Use a nail gun to attach the slats along the Bottom Leg Supports.

Attach the top to the base using wood glue and clamps.

Stain or paint as desired.