NotchLoading plan…
Loading plan…
This console table has a rustic coastal look. It is perfect for a guest bedroom, living room, or entryway. You can mix up the look to match your space using different stains or finishes. This is perfect for our guests who need space to put suitcase underneath and small items on top!
| Item | Qty |
|---|---|
| Board, 1x3 54 feet | 1 board |
| 1 1/4" Kreg screws | 40 each |
| Wood glue | 1 each |
| Stain or paint of choice | 2 each |
Overall cost: $. Lumber prices vary by region, species, and season, so we give a band rather than a figure we would only be pretending to know.
| Part | Qty | T × W × L |
|---|---|---|
| Cut List on www.charlestoncrafted.com | 1 | 1" × 1" × 1" |
Buy 1 board at 8 ft.
1 board
Assumes 8 ft stock, a 1/8" saw kerf, and buying each part at its own width. Change the board size or kerf on the full board plan →
Make cuts according to the cut list.
Visit our site https://www.charlestoncrafted.com/diy-coastal-console-table/ for all the details including the specific cut list!
Drill two pocket holes in the ends of the Top Leg Supports, Bottom Leg Supports, and Side Braces. Drill pocket holes necessary to attach the top pieces together.
Connect the Top pieces together. Router edge for finished look.
Build the front and back of the base by attaching the Top Leg Supports to the top of the Legs, then connecting the Bottom Leg Supports to the Legs where they fit flush.
Attach the top to the base using wood glue and clamps.
Stain or paint as desired.
No reviews yet
Sign in to review this plan or share your build.
No reviews yet. Be the first to build this.