NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A face-frame buffet cabinet with a center divider, flat-panel doors, and a planked top, built almost entirely with pocket-hole joinery.
| Item | Qty | ✓ |
|---|---|---|
| Construction lumber, 2x4, ripped to 3" wide Face frames. | 4 each | ☐ |
| 3/4" hardwood plywood, 4x8 sheet Sides, bottom, and center divider. | 2 each | ☐ |
| Pine board, 1x4, 8 ft Side trim. | 2 each | ☐ |
| 1/2" hardwood plywood, partial sheet Doors. | 1 sheet | ☐ |
| 1/4" plywood, partial sheet Back panel. | 1 sheet | ☐ |
| Construction lumber, 2x6, ripped to 5" wide Top. | 4 each | ☐ |
| Pocket hole screws, assorted | 60 each | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood screws, 3-1/2" Attaches the top through the face frame. | 10 each | ☐ |
| Staples or nails (back panel) | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Paint | 12 oz | ☐ |
| Wood stain | 8 oz | ☐ |
| Hinges and door pulls | 2 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.