Desktop Office or Vanity Organizer

Use 1-1/4" nails and glue to attach the center divider and front trim to the middle shelf.

Trim the side pieces to match the depth of the center divider, then attach with 1-1/4" nails and glue.

Position the angled divider pieces roughly in place, mark the angle needed, then clamp each one securely to the bench and cut carefully — these pieces are too small to cut safely freehand. Attach with 1-1/4" nails and glue.

Attach the plywood back with 3/4" nails and glue.

Assemble the drawer box from the sides and back, nail on the plywood bottom, then attach the drawer face to the drawer sides with 1-1/4" nails.

Sand all edges smooth and finish as desired.