NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A turned-leg console table with an open-back hutch riser on top — extra display and storage height without extending the table's footprint.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Aprons, long | 3 | 3/4" × 2 1/2" × 59" | Pine | ☐ |
| Aprons, short | 4 | 3/4" × 2 1/2" × 18" | Pine | ☐ |
| Tabletop | 1 | 3/4" × 23 1/2" × 64" | Plywood | ☐ |
| Tabletop back trim | 1 | 3/4" × 1 1/2" × 65" | Pine | ☐ |
| Tabletop side trim | 2 | 3/4" × 1 1/2" × 23 1/2" | Pine | ☐ |
| Hutch dividers | 3 | 3/4" × 11 1/4" × 11 1/4" | Pine | ☐ |
| Hutch sides | 2 | 3/4" × 11 1/4" × 30 7/8" | Pine | ☐ |
| Hutch top | 1 | 3/4" × 11 1/4" × 65" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x3, 8 ft | 2 each | ☐ |
| Pine, 1x3, 6 ft | 1 each | ☐ |
| Pine, 1x12, 8 ft | 1 each | ☐ |
| Pine, 1x12, 6 ft | 1 each | ☐ |
| Plywood, 3/4", 4x8 sheet Or a pine project panel for the tabletop. | 1 each | ☐ |
| Turned wood legs, with hardware | 4 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Sandpaper, assorted grit | 4 sheet | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Pocket Hole Jig. Materials: Pine, 1x3, 8 ft, Turned wood legs, with hardware
Drill 3/4" pocket holes facing upward on the aprons before attaching them to the legs — much easier to drill flat on the bench than after the base is assembled. Attach the aprons to the turned legs to form the basic table shape.
Tools: Drill / Driver. Materials: Plywood, 3/4", 4x8 sheet
Attach the tabletop to the aprons using the predrilled 3/4" pocket holes and 1-1/4" pocket hole screws.
Tools: Drill / Driver. Materials: Pine, 1x3, 6 ft
Add extra support boards underneath the tabletop beyond the apron alone — a deep top spanning this length benefits from it, especially once the hutch's weight sits on top.
Tools: Drill / Driver. Materials: Pine, 1x3, 8 ft
Attach stretchers between the legs at the stretcher blocks, hiding the 3/4" pocket holes on the underside.
Tools: Drill / Driver, Pocket Hole Jig. Materials: Pine, 1x12, 8 ft, Pine, 1x12, 6 ft
Attach the hutch's back boards to the dividers with 3/4" pocket holes and 1-1/4" pocket hole screws.
Tools: Brad Nailer. Materials: Pine, 1x12, 6 ft
Attach the top to the hutch framing with nails and glue.
Tools: Drill / Driver, Random Orbit Sander. Materials: Sandpaper, assorted grit
Attach the completed hutch to the tabletop from underneath with screws — this keeps the connection removable if the piece ever needs to work as a plain console table.
Sand every surface and finish.