Custom Lighted Address Plaque — board plan

What to buy, and which parts come off which board.

Buy 4 boards at 8 ft.

7/8" × 5"

1 board · 0.8 board feet (includes 15% for knots and defects) · 25% of the boards you buy used

Board 1 · 71 7/8" left over
23"
1. Sign Back — 23"

7/8" × 3"

1 board · 0.5 board feet (includes 15% for knots and defects) · 24% of the boards you buy used

Board 1 · 72 7/8" left over
22"
1. Cap — 22"

7/8" × 1"

2 boards · 0.7 board feet (includes 15% for knots and defects) · 54% of the boards you buy used

Board 1 · 1/8" left over
23"23"23"8"8"8"1"
1. Long Cap Trim — 23"
2. Sign Trim — 23"
3. Sign Trim — 23"
4. Vertical Cleat — 8"
5. Vertical Cleat — 8"
6. Hanger Cleat — 8"
7. Hanger Spacer — 1"
Board 2 · 88 3/4" left over
3"3"
1. Short Cap Trim — 3"
2. Short Cap Trim — 3"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

7/8" × 5"

Board 1 · 71 7/8" left over

7/8" × 3"

Board 1 · 72 7/8" left over

7/8" × 1"

Board 1 · 1/8" left over

Board 2 · 88 3/4" left over