Countertop Potato Bin

Set your saw to 15° off square and cut one divider with the long point at 9-3/4". Reset the saw to square (0°) and cut the second divider, using the first one's angled edge as your reference. Repeat for the remaining two dividers. Then set the saw to 30° off square, mark the longer corner as shown in the diagram, and cut it off.

Attach the 1x8 bottom to the dividers with 1-1/4" brad nails and wood glue.

Attach the front 1x4 panel with 1-1/4" brad nails and wood glue.

Attach the two back 1x4 panels the same way, with 1-1/4" brad nails and wood glue.

Attach the feet to the bottom, leaving slightly more than 3/4" of clearance on the outside — that extra margin is what lets multiple bins stack. Sand everything smooth, finish with a food-safe stain or leave bare, and add the self-adhesive pads to the bottom of the feet.