NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A two-shelf media console with a center drawer flanked by open pass-through bays — leave the back panel off and both open bays run straight through, front to back.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Shelves | 2 | 3/4" × 11 1/4" × 44 1/2" | 1x12, 8 ft | ☐ |
| Side legs | 4 | 3/4" × 1 1/2" × 17 1/4" | 1x2, 8 ft | ☐ |
| Front/back legs | 4 | 3/4" × 2 1/2" × 17 1/4" | 1x3, 8 ft | ☐ |
| Shelf trim | 4 | 3/4" × 1 1/2" × 41" | 1x2, 8 ft | ☐ |
| Side shelf trim | 4 | 3/4" × 1 1/2" × 8 1/2" | 1x2, 8 ft | ☐ |
| Drawer box dividers | 2 | 3/4" × 11 1/4" × 5 3/4" | 1x12, 8 ft | ☐ |
| Drawer guides | 4 | 3/4" × 1 1/2" × 11 1/2" | 1x2, 8 ft | ☐ |
| Drawer box center trim | 2 | 3/4" × 1 1/2" × 5 3/4" | 1x2, 8 ft | ☐ |
| Top | 1 | 3/4" × 11 1/4" × 48" | 1x12, 8 ft | ☐ |
| Top trim | 2 | 3/4" × 1 1/2" × 48" | 1x2, 8 ft | ☐ |
| Back panel (optional) | 1 | 1/4" × 7 1/4" × 46" | 1/4" plywood, panel for back (optional) | ☐ |
| Drawer bottoms | 2 | 3/4" × 11 1/4" × 18" | 1x12, 8 ft | ☐ |
| Drawer backs | 2 | 3/4" × 5 1/2" × 18" | 1x6, 12 ft | ☐ |
| Drawer sides | 4 | 3/4" × 5 1/2" × 12 1/4" | 1x6, 12 ft | ☐ |
| Drawer fronts | 2 | 3/4" × 5 1/2" × 19 1/2" | 1x6, 12 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 8 ft | 2 each | ☐ |
| 1x2, 8 ft | 5 each | ☐ |
| 1x3, 8 ft | 1 each | ☐ |
| 1x6, 12 ft | 1 each | ☐ |
| 1/4" plywood, panel for back (optional) | 1 each | ☐ |
| Brad nails, 1-1/4" and 2" | 80 each | ☐ |
| Self-tapping wood screws, 2", or pocket hole screws, 1-1/4" | 30 each | ☐ |
| Wood glue and wood filler | 1 set | ☐ |
| Sandpaper, 120 grit | 4 sheet | ☐ |
| Paint, primer or stain and poly | 1 set | ☐ |
| Knobs | 2 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.