NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A corner base cabinet with an angled pie-cut front that turns a dead kitchen corner into deep, reachable storage. Built to match a standard base run.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Larger back piece | 1 | 3/4" × 34 1/2" × 34 3/4" | 3/4" plywood (cheaper) | ☐ |
| Smaller back piece | 1 | 3/4" × 34 1/2" × 34" | 3/4" plywood (cheaper) | ☐ |
| Bottom shelf | 1 | 3/4" × 34" × 34" | 3/4" plywood | ☐ |
| Sides Must match the side height/depth of your other base cabinets. | 2 | 3/4" × 22 1/4" × 34 1/2" | 3/4" plywood | ☐ |
| Top (pie-cut) At least 34" x 20" to start; cut the angled pie-cut front from it. | 1 | 3/4" × 20" × 34" | 3/4" plywood (cheaper) | ☐ |
| Base support (long) | 1 | 3/4" × 5" × 34" | 3/4" plywood (cheaper) | ☐ |
| Base support (short) | 1 | 3/4" × 5" × 15" | 3/4" plywood (cheaper) | ☐ |
| Face frame stiles Match the stiles from your other base cabinets. | 2 | 3/4" × 1 1/2" × 27" | 1x2 | ☐ |
| Face frame rails | 2 | 3/4" × 1 1/2" × 13 1/2" | 1x2 | ☐ |
| Face frame angled rails | 2 | 3/4" × 1 1/2" × 12 3/4" | 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, cabinet grade Prefinished or good veneer for the visible sides. | 1 sheet | ☐ |
| 3/4" plywood, sheathing grade Cheaper ply for the hidden back, top, and base supports. | 1 sheet | ☐ |
| Hardwood 1x2, 8 ft (Oak / Maple) Face frame — match the stiles to your other base cabinets. | 2 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Wood glue | 6 oz | ☐ |
| Cabinet door with concealed euro hinges Match height to the other base cabinets; width 3/8" wider than the face-frame opening. | 1 each | ☐ |
| Finish / cabinet paint | 1 kit | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.