Cordless Tool Charging Station — board plan

What to buy, and which parts come off which board.

Buy 4 boards at 8 ft.

3/4" × 7"

1 board · 3.5 board feet (includes 15% for knots and defects) · 89% of the boards you buy used

Board 1 · 10 1/2" left over
26"26"16"16"
1. Side — 26"
2. Side — 26"
3. Middle Shelf — 16"
4. Bottom Shelf — 16"

3/4" × 5"

1 board · 1.0 board feet (includes 15% for knots and defects) · 35% of the boards you buy used

Board 1 · 62 3/4" left over
16"16"
1. Top Rail — 16"
2. Bottom Rail — 16"

3/4" × 3"

1 board · 0.3 board feet (includes 15% for knots and defects) · 18% of the boards you buy used

Board 1 · 78 7/8" left over
16"
1. Top Shelf — 16"

3/4" × 1"

1 board · 0.2 board feet (includes 15% for knots and defects) · 36% of the boards you buy used

Board 1 · 61 3/4" left over
17"16"
1. Bottom Shelf Trim — 17"
2. Top Shelf Trim — 16"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 7"

Board 1 · 10 1/2" left over

3/4" × 5"

Board 1 · 62 3/4" left over

3/4" × 3"

Board 1 · 78 7/8" left over

3/4" × 1"

Board 1 · 61 3/4" left over