Convertible 3 in 1 Toy Chest

• Cut the sides of the toy box to size. Using a drill and a router notch out the handles on the two side boards. Using a jigsaw cut the lip into the 2 sides and front panel boards.
• Now assemble using pocket screws the base of the toy box.

• Attach the lid to the top of the toy box.
• Start by attaching the back fixed portion of the lid. This is where the backrest board will rest when the toy box is a bench.
• Now using the narrow hinges attach the lid in front and flush with the fixed board. I recommend using a router to recess the hinge.

Cut out the backrest. Using a jigsaw create a curved top. Actually, with the back rest, you can get creative with how you choose to cut the top portion of the backrest. For this, I just curved the top sides. It's just important that the side and bottom stay straight.

WIth the backrest cut out attach Armrest and support legs to the backrest. I recommend attaching the 1x2s together first then attaching it to the backrest.

• Mount backrest/table top to toy box base by drilling a hole for the 1/4 in. Hex Cap Screw.
• Place washers between each board on both sides and secure it with the nut inside the toy box.
• Then drill a hole for the placement of the eyebolt. This is what will secure the table in place when the backrest is down and in a table position or when it's up in a bench position.