NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A single base cabinet with a shelf-pin adjustable shelf, a mitered-frame door, and an optional pull-out drawer built from the leftover scrap.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides (A) | 2 | 3/4" × 23 1/2" × 29 1/4" | 3/4" MDF or plywood | ☐ |
| Bottom (B) | 1 | 3/4" × 23 1/2" × 22 1/2" | 3/4" MDF or plywood | ☐ |
| Top (C) | 2 | 3/4" × 23 1/2" × 24" | 3/4" MDF or plywood | ☐ |
| Back (D) | 1 | 3/8" × 24" × 30" | 3/8" MDF or plywood | ☐ |
| Bottom trim (E) | 1 | 3/4" × 2 1/2" × 24" | 1x3 | ☐ |
| Top trim (F) | 2 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Side trim (G) | 2 | 3/4" × 1 1/2" × 25 1/4" | 1x2 | ☐ |
| Shelf (H) | 1 | 3/4" × 23 1/2" × 22 1/2" | 3/4" MDF or plywood | ☐ |
| Door backs (I) | 2 | 3/8" × 10 1/4" × 25" | 3/8" MDF or plywood | ☐ |
| Door rails (J) | 4 | 3/8" × 1 1/2" × 10 1/4" | 3/8" MDF or plywood | ☐ |
| Door stiles (K) | 4 | 3/8" × 1 1/2" × 22" | 3/8" MDF or plywood | ☐ |
| Pull-out drawer bottom (L) Optional — sized to use the scrap left from cutting the main box. | 1 | 3/4" × 17 1/2" × 22" | 3/4" MDF or plywood scrap | ☐ |
| Pull-out drawer sides (M) | 2 | 3/4" × 5 1/2" × 22" | 1x6 | ☐ |
| Pull-out drawer front/back (N) | 2 | 3/4" × 5 1/2" × 19" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" MDF or plywood, ripped into 23-1/2" strips, 8 ft sheet | 1 each | ☐ |
| 1x6 board, for the optional pull-out drawer (Pine) | 1 each | ☐ |
| 3/8" MDF or plywood, for backs and doors, full sheet | 1 each | ☐ |
| 1x2 board (Pine) | 1 each | ☐ |
| 1x3 board, 24 in needed (Pine) | 1 each | ☐ |
| Base moulding, 2-1/2" high, 24 in | 1 each | ☐ |
| Butterfly hinges or face-frame euro hinges | 2 set | ☐ |
| Pulls or knobs | 2 each | ☐ |
| Shelf pins | 4 each | ☐ |
| Undermount drawer slides, 21" Only needed if building the optional pull-out drawer. | 1 pair | ☐ |
| Edge banding Only needed if staining rather than painting. | 1 roll | ☐ |
| Finish nails, 1-1/4" and 2" | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.