Chunky Leg Rectangle Coffee Table

Measure the ends of the 2x6 legs to confirm they're 1-1/2" x 5-1/2", adjusting if necessary. Cut the corner notches out of the tabletop boards with a jigsaw and lay them out.

Measure between the cutouts and cut the top frame ends to fit. Nail the outer 1x3 frame together at the corners with glue and 1-1/4" brad nails, then measure the inside and cut the cross pieces to fit, nailing and gluing them inside.

Glue the tabletop boards edge to edge on a flat, level surface. Glue the back of the top frame and nail it to the underside of the boards.

Repeat the frame and panel steps for the bottom shelf, using a 1x2 outer frame instead of 1x3. Sand, stain, or paint both shelves and all four legs before assembly.

With the top shelf face down on a level surface, set the legs in place and attach with 2" star bit screws, two per leg, angled slightly outward for stability.

Mark the legs 2-1/2" down and set the bottom shelf in place. Attach with two angled screws per leg.