NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A stepped, layered wood tray shaped like a Christmas tree — every row is a different compound angle, mounted on a plywood backer.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top pieces One at 12-3/8", one at 11-3/8" — long point to long point, one end at 40° off square, the other at 25° off square, ends not parallel. | 2 | 3/4" × 1 1/2" × 12" | Pine | ☐ |
| Row pieces Long point to short point, ends parallel, both ends cut at 25° off square. | 4 | 3/4" × 1 1/2" × 5 1/2" | Pine | ☐ |
| Bottom row piece Long point to long point, ends not parallel, both ends cut at 25° off square. | 1 | 3/4" × 1 1/2" × 13 7/8" | Pine | ☐ |
| Base piece | 1 | 3/4" × 1 1/2" × 6 1/2" | Pine | ☐ |
| Base end pieces | 2 | 3/4" × 1 1/2" × 2" | Pine | ☐ |
| Backer Trace from the assembled tree shape before cutting. | 1 | 1/4" × 16" × 24" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x2, 8 ft Furring strip works as a cheaper substitute. | 1 each | ☐ |
| Plywood, 1/4", 24" x 16" | 1 each | ☐ |
| Brad nails, 1-1/4" and 3/4" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.