Child-Sized Surf Board Adirondack Chair — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

3/4" × 7 1/4" — Pine

1 board · 1.2 board feet (includes 15% for knots and defects) · 29% of the boards you buy used

Board 1 · 68 1/8" left over
26 3/4"
1. Seat back, middle — 26 3/4"

3/4" × 3 1/2" — Pine

1 board · 1.3 board feet (includes 15% for knots and defects) · 68% of the boards you buy used

Board 1 · 30 1/2" left over
17 3/4"17 3/4"15"13 1/2"
1. Stringers — 17 3/4"
2. Stringers — 17 3/4"
3. Front apron — 15"
4. Bottom seat back support — 13 1/2"

3/4" × 2 1/2" — Pine

2 boards · 1.7 board feet (includes 15% for knots and defects) · 61% of the boards you buy used

Board 1 · 1 5/8" left over
24"24"15"14 7/8"14 7/8"
1. Seat back, sides — 24"
2. Seat back, sides — 24"
3. Front seat slat — 15"
4. Arm rests (surfboard shaped) — 14 7/8"
5. Arm rests (surfboard shaped) — 14 7/8"
Board 2 · 72 3/4" left over
11"11"
1. Front legs — 11"
2. Front legs — 11"

3/4" × 1 1/2" — Pine

2 boards · 1.3 board feet (includes 15% for knots and defects) · 75% of the boards you buy used

Board 1 · 2 3/4" left over
16 1/2"15"15"15"15"15"
1. Middle seat back support — 16 1/2"
2. Main seat slats — 15"
3. Main seat slats — 15"
4. Main seat slats — 15"
5. Main seat slats — 15"
6. Main seat slats — 15"
Board 2 · 44 5/8" left over
13 5/8"13 5/8"13 1/2"4 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 7 1/4" — Pine

Board 1 · 68 1/8" left over

3/4" × 3 1/2" — Pine

Board 1 · 30 1/2" left over

3/4" × 2 1/2" — Pine

Board 1 · 1 5/8" left over

Board 2 · 72 3/4" left over

3/4" × 1 1/2" — Pine

Board 1 · 2 3/4" left over

Board 2 · 44 5/8" left over