NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A tiny two-drawer cube — the whole thing, box and drawers both, comes from one cedar fence picket.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Box sides and back | 3 | 1/2" × 4 1/2" × 4 1/2" | Cedar | ☐ |
| Box top and bottom Trim to your actual box width once the sides and back are assembled — should end up close to 5-1/2". | 2 | 1/2" × 5 1/2" × 5 1/2" | Cedar | ☐ |
| Interior shelf Trim to fit once the box is assembled; this length also sets the drawer length. | 1 | 1/2" × 4 1/2" × 5" | Cedar | ☐ |
| Drawer fronts and backs | 4 | 1/2" × 1 7/8" × 4 1/4" | Cedar | ☐ |
| Drawer sides Trim length to fit once the drawer front and back are joined. | 4 | 1/2" × 1 7/8" × 4" | Cedar | ☐ |
| Drawer bottoms Trace and trim to the assembled drawer box. | 2 | 1/2" × 3 1/4" × 4" | Cedar | ☐ |
| Wood pulls Cut from scrap offcuts. | 2 | 1/2" × 3/4" × 1 1/2" | Cedar | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Cedar fence picket, 1/2" x 5-1/2" x 6 ft (Cedar) The entire box and both drawers come from this one board. | 1 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Finish nails, 1" | 40 each | ☐ |
| Finish of choice (paint or stain) | 4 oz | ☐ |
| Knobs or pulls (optional) Plan default is wood pulls cut and glued from scrap — skip this line if using those instead. | 2 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.