NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A twin bed with three built-in drawers on one side and a full rolling trundle underneath — plus a ladder-leg end panel that doubles as a decorative detail.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End legs (both ends, plus ladder legs) | 6 | 1 1/2" × 3 1/2" × 36 3/4" | Pine | ☐ |
| End bottoms | 2 | 3/4" × 9 1/4" × 34" | Pine | ☐ |
| End top rails | 3 | 3/4" × 5 1/2" × 34" | Pine | ☐ |
| End panels | 2 | 1/4" × 15" × 34" | 1/4" plywood | ☐ |
| Ladder rungs | 2 | 1 1/2" × 3 1/2" × 15" | Pine | ☐ |
| Ladder-side top rails | 2 | 3/4" × 5 1/2" × 9 1/2" | Pine | ☐ |
| Top trim, ladder side | 2 | 3/4" × 1 1/2" × 13" | Pine | ☐ |
| Top trim, plain end | 1 | 3/4" × 1 1/2" × 41" | Pine | ☐ |
| Drawer support framing, long | 4 | 1 1/2" × 3 1/2" × 75" | Pine | ☐ |
| Drawer support framing, short | 8 | 1 1/2" × 3 1/2" × 9 1/2" | Pine | ☐ |
| Siderails | 4 | 3/4" × 5 1/2" × 75" | Pine | ☐ |
| Top trim, siderails | 2 | 3/4" × 1 1/2" × 75" | Pine | ☐ |
| Drawer support rails | 2 | 1 1/2" × 1 1/2" × 34" | Pine | ☐ |
| Drawer support rail ends | 2 | 3/4" × 1 1/2" × 34" | Pine | ☐ |
| Bed slats | 10 | 3/4" × 3 1/2" × 38" | Pine | ☐ |
| Trundle supports | 2 | 1 1/2" × 3 1/2" × 73" | Pine | ☐ |
| Trundle slats | 10 | 3/4" × 3 1/2" × 33" | Pine | ☐ |
| Trundle ends | 2 | 3/4" × 5 1/2" × 33" | Pine | ☐ |
| Trundle back | 1 | 3/4" × 5 1/2" × 74 1/2" | Pine | ☐ |
| Trundle front | 1 | 3/4" × 9 1/4" × 74 1/2" | Pine | ☐ |
| Drawer sides Assumes 23" openings and 1/2" clearance slides — verify against your actual hardware before cutting. | 6 | 3/4" × 5 1/2" × 18" | Pine | ☐ |
| Drawer front/back | 6 | 3/4" × 5 1/2" × 22" | Pine | ☐ |
| Drawer bottoms | 3 | 1/4" × 18" × 22" | 1/4" plywood | ☐ |
| Drawer faces | 3 | 3/4" × 9 1/4" × 22 3/4" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Caster wheels, 2", 50 lb rating minimum | 6 each | ☐ |
| Drawer slides, 18" | 3 pair | ☐ |
| Pine, 2x4, 8 ft | 9 each | ☐ |
| Pine, 2x2, 8 ft | 1 each | ☐ |
| Pine, 1x6, 10 ft | 5 each | ☐ |
| Pine, 1x2, 8 ft | 4 each | ☐ |
| Pine, 1x10, 10 ft | 2 each | ☐ |
| Pine, 1x4 or 1x3, 8 ft Bed and trundle slats. | 10 each | ☐ |
| Plywood, 1/4", 4x8 sheet End panels and drawer bottoms. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Pocket hole screws, 2-1/2" | 1 box | ☐ |
| Self-tapping wood screws, 2-1/2" | 1 box | ☐ |
| Brad nails, 1-1/4" and 3/4" | 1 box | ☐ |
| Wood glue | 10 oz | ☐ |
| Drawer handles or pulls | 5 each | ☐ |
| Sandpaper, assorted grit | 8 sheet | ☐ |
| Stain or paint | 1 quart | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.