NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
This closet organizer can be adapted to almost any size closet.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top/Bott/Shelves | 4 | 3/4" × 16" × 23" | — | ☐ |
| Sides | 2 | 3/4" × 16" × 65" | — | ☐ |
| Wall Brace | 2 | 3/4" × 3" × 23" | — | ☐ |
| Drawer Box Front/Backs (LG) | 6 | 3/4" × 6" × 19" | — | ☐ |
| Drawer Sides (LG) | 6 | 3/4" × 6" × 15" | — | ☐ |
| Drawer Slide Mounts (LG) | 8 | 3/4" × 3" × 15" | — | ☐ |
| Drawer Bottoms (LG) | 3 | 1/4" × 15" × 21" | — | ☐ |
| Drawer Front (SM) | 1 | 3/4" × 4" × 22" | — | ☐ |
| Drawer Front (LG) | 3 | 3/4" × 7" × 22" | — | ☐ |
| Face Frame Bottom (This was cut out of Plywood) | 1 | 3/4" × 3" × 22" | — | ☐ |
| Drawer Box Front/Back (SM) | 2 | 3/4" × 3" × 19" | — | ☐ |
| Drawer Bottom (SM) | 1 | 1/4" × 15" × 21" | — | ☐ |
| Drawer Sides (SM) | 2 | 3/4" × 3" × 15" | — | ☐ |
| Face Frame Vertical (uses 1x2x8 boards) | 2 | 3/4" × 1" × 66" | — | ☐ |
| Face Frame Horizontal (uses 1x2x8 boards) | 6 | 3/4" × 1" × 22" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 2 board | ☐ |
| Plywood, 1/4" Thick Full Sheet | 1 board | ☐ |
| Board, 1x2 96" | 3 board | ☐ |
| 16" Ball Bearing Drawer Slides | 3 each | ☐ |
| 14" Ball Bearing Drawer Slide | 1 each | ☐ |
| Knobs/Pulls | 4 each | ☐ |
| 1 1/4" Kreg Pocket Hole Screws | 98 each | ☐ |
| Wood Glue | 1 each | ☐ |
| 1 1/4" Brad Nails | 1 each | ☐ |
| Paint/Stain | 1 each | ☐ |
| Wood Filler | 1 each | ☐ |
| Sandpaper (120g/220g) | 1 each | ☐ |
| 1 1/4" Hardwood Dowels | 3 each | ☐ |
| 1 5/16-inch Heavy Duty Closet Pole Sockets | 3 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.