Brookstone Desk

Build two leg sets, attaching the leg supports to the legs with self-tapping screws.

Attach the two leg sets together with the back supports.

Reserve 24-1/2" of the 1x4 for the drawer face. Using the remainder, scribe the back cross support pieces in place against the frame, cut, and attach with 1-1/4" brad nails and glue.

If using a pocket hole jig, join the top boards first. Attach the assembled top to the frame with glue and 1-1/4" brad nails, keeping overhangs even.

Attach the drawer support cleats under the desktop with glue and 2-1/2" screws — these also help prevent the desktop from sagging.

Build the drawer box to fit the opening using pocket holes or 1-1/4" brad nails. Attach the bottom with 3/4" brad nails and glue, then install on the drawer slides.

Attach the drawer face, held down about 1/8" to clear the desktop, with 1-1/4" brad nails and glue, avoiding the handle location. Sand and apply primer and paint, or stain and poly.