NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A queen platform storage bed built as three drawer benches — six drawers total — clad in scrap or pallet wood. A big, materials-heavy build.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End bench top | 1 | 3/4" × 15 3/4" × 58 1/2" | 3/4" plywood | ☐ |
| End bench panels | 3 | 3/4" × 15 3/4" × 15 3/4" | 3/4" plywood | ☐ |
| End bench frame verticals | 4 | 3/4" × 3 1/2" × 28 1/8" | 1x4 | ☐ |
| End bench short rails | 2 | 3/4" × 1 1/2" × 16 1/2" | 1x2 | ☐ |
| End bench long rail (1x2) | 1 | 3/4" × 1 1/2" × 57" | 1x2 | ☐ |
| End bench long rail (1x4) | 1 | 3/4" × 3 1/2" × 57" | 1x4 | ☐ |
| End drawer fronts/backs Cut to fit opening and slides. | 4 | 3/4" × 7 1/4" × 15 3/4" | 1x8 | ☐ |
| End drawer sides Cut to fit. | 4 | 3/4" × 7 1/4" × 25 5/8" | 1x8 | ☐ |
| End drawer bottoms | 2 | 1/4" × 15 3/4" × 27 1/8" | 1/4" plywood | ☐ |
| Side bench tops | 2 | 3/4" × 15 3/4" × 62 1/2" | 3/4" plywood | ☐ |
| Side bench panels | 6 | 3/4" × 15 3/4" × 15 3/4" | 3/4" plywood | ☐ |
| Side bench frame verticals | 8 | 3/4" × 3 1/2" × 30 1/8" | 1x4 | ☐ |
| Side bench short rails | 4 | 3/4" × 1 1/2" × 16 1/2" | 1x2 | ☐ |
| Side bench long rails (1x2) | 2 | 3/4" × 1 1/2" × 61" | 1x2 | ☐ |
| Side bench long rails (1x4) | 2 | 3/4" × 3 1/2" × 61" | 1x4 | ☐ |
| Side drawer fronts/backs Cut to fit. | 8 | 3/4" × 7 1/4" × 15 3/4" | 1x8 | ☐ |
| Side drawer sides Cut to fit. | 8 | 3/4" × 7 1/4" × 27 5/8" | 1x8 | ☐ |
| Side drawer bottoms | 4 | 1/4" × 15 3/4" × 29 1/8" | 1/4" plywood | ☐ |
| Tie-in pieces (long) 1x4 or 1x3. | 4 | 3/4" × 3 1/2" × 58 1/2" | 1x4 | ☐ |
| Tie-in pieces (cross) 1x4 or 1x3. | 2 | 3/4" × 3 1/2" × 62 1/2" | 1x4 | ☐ |
| Slats Any scrap wood or plywood; space per your mattress. | 12 | 3/4" × 2 1/2" × 26 1/2" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet Ripped into 15-3/4"-wide strips — all rips exactly the same width. | 2 each | ☐ |
| Plywood, 1/4", 4x8 sheet Drawer bottoms, ripped to 15-3/4". | 1 each | ☐ |
| 1x4, 8 ft (Pine) Face frames and tie-ins. | 11 each | ☐ |
| 1x3, 8 ft (Pine) Slats. | 4 each | ☐ |
| 1x2, 8 ft (Pine) | 4 each | ☐ |
| 1x8, 8 ft (Pine) Drawer boxes — plywood ripped to 7-3/4" is a cheaper, squarer alternative. | 2 each | ☐ |
| 1x8, 10 ft (Pine) Drawer boxes. | 3 each | ☐ |
| Euro drawer slides, 16" bottom-mount (sets) | 6 each | ☐ |
| Knobs or handles | 6 each | ☐ |
| Pallet or scrap wood for siding and drawer faces Reclaimed; drawer faces can also be 1x12s. | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" | 150 each | ☐ |
| Wood glue | 16 oz | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.