NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A frameless plywood bay-shelf cabinet — ripped plywood panels split into three bays by two verticals, with edge-banded exposed edges and no face frame.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top Rip to width, then crosscut to length. | 1 | 3/4" × 11 1/4" × 66" | 3/4" plywood | ☐ |
| Verticals | 3 | 3/4" × 11 1/4" × 26 1/4" | 3/4" plywood | ☐ |
| Shelves | 4 | 3/4" × 11 1/4" × 31 7/8" | 3/4" plywood | ☐ |
| Bay supports | 4 | 3/4" × 2 1/2" × 31 7/8" | Pine 1x3 | ☐ |
| Back | 1 | 1/4" × 27" × 66" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, 4x8 sheet Top, verticals, shelves. | 1 each | ☐ |
| Edge banding, 25 ft roll | 1 each | ☐ |
| Pine, 1x3, 12 ft Bay supports. | 1 each | ☐ |
| 1/4" plywood or underlayment, 4x8 sheet Back panel. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 6 oz | ☐ |
| Wood filler, sandpaper, and paint | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.