Birdhouse Bath Shelf with Towel Bar — board plan

What to buy, and which parts come off which board.

Buy 3 boards at 8 ft.

3/4" × 5 1/2" — Pine

1 board · 2.6 board feet (includes 15% for knots and defects) · 85% of the boards you buy used

Board 1 · 14 3/8" left over
22 1/2"16 1/4"16 1/4"12 1/2"12 1/2"
1. Shelf — 22 1/2"
2. Sides — 16 1/4"
3. Sides — 16 1/4"
4. Roof cap sides — 12 1/2"
5. Roof cap sides — 12 1/2"

3/4" × 1 1/2" — Pine

1 board · 0.7 board feet (includes 15% for knots and defects) · 88% of the boards you buy used

Board 1 · 12" left over
25"25"16 1/4"16 1/4"
1. Drop ledge — 25"
2. Drop ledge — 25"
3. Roof trim — 16 1/4"
4. Roof trim — 16 1/4"

1/4" × 24" — Plywood or beadboard scrap

1 board · 0.7 board feet (includes 15% for knots and defects) · 15% of the boards you buy used

Board 1 · 81 1/8" left over
13 3/4"
1. Back — 13 3/4"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 5 1/2" — Pine

Board 1 · 14 3/8" left over

3/4" × 1 1/2" — Pine

Board 1 · 12" left over

1/4" × 24" — Plywood or beadboard scrap

Board 1 · 81 1/8" left over