NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small end-of-bed bench with jigsaw-cut leg profiles, a lower shelf, and a slatted top made from scrap 1x4. A quick offcut-eater.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs Cut the shaped leg profile with a jigsaw; make both identical. | 2 | 3/4" × 11 1/4" × 17 1/4" | 1x12 | ☐ |
| Lower shelf / seat support | 2 | 3/4" × 11 1/4" × 21 1/2" | 1x12 | ☐ |
| Side aprons Both ends cut at 45° off square, not parallel. | 2 | 3/4" × 3 1/2" × 30" | 1x4 | ☐ |
| Top slats | 9 | 3/4" × 3 1/2" × 14 1/4" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 6 ft (Pine) Shaped legs and lower shelf. | 1 each | ☐ |
| 1x4, 8 ft (Pine) Side aprons and top slats — scrap 1x4 works great for the slats. | 2 each | ☐ |
| Pocket hole screws, 1-1/4", or self-tapping screws, 2" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Wood filler and finish | 1 kit | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.