Bath Vanity Hutch with Recessed Lights — board plan

What to buy, and which parts come off which board.

Buy 8 boards at 8 ft.

3/4" × 9 1/4" — 1x10

1 board · 3.4 board feet (includes 15% for knots and defects) · 65% of the boards you buy used

Board 1 · 33 5/8" left over
48"6 1/2"6 1/2"
1. Light board — 48"
2. Light board returns — 6 1/2"
3. Light board returns — 6 1/2"

3/4" × 7 1/4" — 1x8

5 boards · 14.1 board feet (includes 15% for knots and defects) · 69% of the boards you buy used

Board 1 · 4 3/8" left over
48"10 1/2"10 1/2"10 1/2"10 1/2"
1. Tower sides — 48"
2. Tower shelves/braces — 10 1/2"
3. Tower shelves/braces — 10 1/2"
4. Tower shelves/braces — 10 1/2"
5. Tower shelves/braces — 10 1/2"
Board 2 · 4 3/8" left over
48"10 1/2"10 1/2"10 1/2"10 1/2"

3/4" × 2 1/2" — 1x3

1 board · 0.8 board feet (includes 15% for knots and defects) · 60% of the boards you buy used

Board 1 · 38 3/4" left over
48 3/4"7 1/4"
1. Front trim — 48 3/4"
2. Corner trim — 7 1/4"

1/2" × 4 1/4" — Base moulding

1 board · 1.2 board feet (includes 15% for knots and defects) · 76% of the boards you buy used

Board 1 · 22 7/8" left over
72"
1. Base moulding — 72"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

Bath Vanity Hutch with Recessed Lights — board plan

3/4" × 9 1/4" — 1x10

Board 1 · 33 5/8" left over

3/4" × 7 1/4" — 1x8

Board 1 · 4 3/8" left over

Board 2 · 4 3/8" left over

3/4" × 2 1/2" — 1x3

Board 1 · 38 3/4" left over

1/2" × 4 1/4" — Base moulding

Board 1 · 22 7/8" left over

Board 3 · 46 7/8" left over

Board 4 · 46 7/8" left over

Board 5 · 46 7/8" left over