Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Barn Doors
These barn doors aren't your typical run of the mill variety that are so prevalent across the internet.
- Difficulty
- Intermediate
- Time
- 3.8–7 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top & Bottom Rail | 2 | 1 1/2" × 5" × 28 1/2" | — | ☐ |
| Side Rail | 2 | 1 1/2" × 5" × 84 1/2" | — | ☐ |
| Center Panel | 1 | 1/2" × 29 1/2" × 75 1/2" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| MDF, 1/2" Thick Full Sheet | 2 board | ☐ |
| Board, 2x6 96" | 6 board | ☐ |
| 2-1/2" pocket hole screws | 24 each | ☐ |
| Sliding door rollers | 4 each | ☐ |
| 8' track sections | 2 each | ☐ |
| Track union | 1 each | ☐ |
| Track end caps | 2 each | ☐ |
| Bottom track guides | 2 each | ☐ |
| 18" handles | 2 each | ☐ |
| Elmer's wood putty | 1 each | ☐ |
| General Finishes primer (quart) | 2 each | ☐ |
| General Finishes Milk Paint, Queenstown Gray (quart) | 3 each | ☐ |
| General Finishes High Performance Top Coat, Flat (quart) | 2 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.