NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A combination birdhouse and open feeder built from cedar fence boards under one shared peaked roof.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| A — base panel | 1 | 5/8" × 5 1/2" × 15 1/4" | Cedar fence board | ☐ |
| B — back panel 22.5° bevel. | 1 | 5/8" × 5 1/2" × 4 5/8" | Cedar fence board | ☐ |
| C — corner pieces 22.5° angle. | 4 | 5/8" × 4" × 6" | Cedar fence board | ☐ |
| D — roof-slope side panels 45° angle. One gets a 1-1/2" entrance hole and a 3/8" dowel hole for the perch. | 2 | 5/8" × 5 1/2" × 11 1/2" | Cedar fence board | ☐ |
| E — wall panels 45° bevel. | 2 | 5/8" × 5 1/2" × 8 3/4" | Cedar fence board | ☐ |
| F — small wall panel 22.5° bevel. | 1 | 5/8" × 5 1/2" × 3" | Cedar fence board | ☐ |
| G — small end panels Drilled with a 3/8" hole. | 2 | 5/8" × 4" × 1 1/2" | Cedar fence board | ☐ |
| H — small wall panel | 1 | 5/8" × 5 1/2" × 1 1/2" | Cedar fence board | ☐ |
| I — wall panels 45° bevel. | 2 | 5/8" × 5 1/2" × 8 3/4" | Cedar fence board | ☐ |
| J — hinged roof/door panels 22.5° bevel. These hinge open for cleanout access. | 2 | 5/8" × 5 1/2" × 6 3/4" | Cedar fence board | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Cedar fence board, 5/8" x 5-1/2" x 6 ft | 2 each | ☐ |
| Exterior wood glue | 2 oz | ☐ |
| Deck screws, 1-1/4" | 12 each | ☐ |
| Finish nails, 16 gauge, 1-1/4" | 20 each | ☐ |
| Small hinges (for access door) | 1 pair | ☐ |
| 3/8" dowel (perch) | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.