Skip to content

Browse▾

All plans Cutting Boards Furniture Storage & Shelving Outdoor Shop Projects Gifts & Small Projects

Learning About FAQ

Search plans

Search plans

Browse by category▾

All plans Cutting Boards Furniture Storage & Shelving Outdoor Shop Projects Gifts & Small Projects

Learning About FAQLog in Sign up

Browse

Cutting Boards
Furniture
Storage & Shelving
Outdoor
Shop Projects
Gifts & Small Projects

Site

All plans
Learning
About
FAQ

Notch — Built naturally. Made to last.

© 2026 Notch. Measure your own material and follow the safety guidance for your tools — a plan is a well-specified starting point, not a substitute for judgement at the saw.

Loading plan…

Build: Baby Changing Table Topper · Notch

← Back to the plan

Furniture

Baby Changing Table Topper

Step-by-step build — 4 steps. Also available as a print sheet.

1Build the box
Tools
- Drill / Driver
- Pocket Hole Jig
Materials
- 1x4, 10 ft
- Pocket hole screws, 1-1/4"
Attach the two end pieces to the front and back with pocket holes hidden on the insides.
2Add the divider
Tools
- Drill / Driver
- Pocket Hole Jig
Materials
- 1x4, 10 ft
- Pocket hole screws, 1-1/4"
Add the divider positioned to fit your changing pad.
3Secure to the cabinet
Tools
- Drill / Driver
Materials
- L brackets (optional, for securing to cabinet)
Secure the topper to the cabinet with pocket holes along the back edge, or with L brackets.
4Finish
Materials
- Primer and paint, or stain and poly
Apply primer and paint, or stain and poly.