Art Storage Shelf with Caddies

Drill 3/4" pocket holes on all four sides of the smaller 1x12 boards, two per side. Attach to the 1x3 dividers with 1-1/4" pocket hole screws.

Measure and cut the side trim pieces to fit, and attach with pocket holes on the underside as well as 1-1/4" brad nails to the 1x3 side trim. Set the top shelf aside.

Drill 3/4" pocket holes on all four sides of the remaining 1x12 boards. Attach the 1x3 side trim pieces with 1-1/4" pocket hole screws, hiding them on the underside.

Finish the front and back with 1x3 trim, attaching on the bottom through the predrilled pocket holes and nailing to the side trim with 1-1/4" brad nails and glue.

Attach the legs with 1-1/4" brad nails and glue.

Attach the two shelves inside the legs with 1-1/4" screws or brad nails and glue.

Sand every surface and finish.