NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A low, raked-leg footstool with a decked 1x4 top on two 30°-angled stringers — built for reclining with an Adirondack chair, distinct from this catalog's boxier Adirondack side table.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Stringers Both ends cut at 30° off square, parallel to each other, long point to short point measurement. | 2 | 1 1/2" × 3 1/2" × 23 1/2" | 2x4, 8 ft or stud length | ☐ |
| Top boards | 5 | 3/4" × 3 1/2" × 22 1/2" | 1x4, 12 ft | ☐ |
| Legs One end cut at 30° off square, longest point measurement. | 2 | 1 1/2" × 3 1/2" × 13 3/4" | 2x4, 8 ft or stud length | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft or stud length | 1 each | ☐ |
| 1x4, 12 ft | 1 each | ☐ |
| Exterior self-tapping wood screws, 2" and 2-1/2" | 20 each | ☐ |
| Exterior penetrating wood stain or paint | 1 set | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Miter Saw. Materials: 2x4, 8 ft or stud length
Trim the bottom ends of the stringers to their 30° angle.
Tools: Drill / Driver. Materials: 1x4, 12 ft, Exterior self-tapping wood screws, 2" and 2-1/2"
Attach the top boards across the stringers with nails or screws, evenly spaced.
Tools: Drill / Driver. Materials: 2x4, 8 ft or stud length, Exterior self-tapping wood screws, 2" and 2-1/2"
Attach the angled legs and flip the stool over.
Materials: Exterior penetrating wood stain or paint
Apply exterior stain or paint.