Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
7-foot Outdoor Table with Bench
This DIY outdoor table is made out of pieces of 2x6 that are screwed together with pocket holes.
- Difficulty
- Easy
- Time
- 2.5–4.5 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Table top boards | 6 | 2" × 6" × 7" | — | ☐ |
| Stretchers | 2 | 2" × 6" × 80" | — | ☐ |
| Cross supports | 3 | 2" × 6" × 30" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Treated lumber boards, 2"x6"x8' | 8 board | ☐ |
| Treated lumber board, 2"x6"x10' | 1 board | ☐ |
| 150 grit sandpaper | 1 each | ☐ |
| 220 grit sandpaper (use any other grit in between these two for a better finish) | 1 each | ☐ |
| Box of 2" Kreg Blue-Kote screws (see tools list) | 1 each | ☐ |
| Box of small bolts | 1 each | ☐ |
| Powder-coated legs from Semi Exact (link in Extras tab), more if you choose to build the bench | 2 each | ☐ |
| Wood penetrating oil for finishing | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.