NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A square rolling coffee table with six flush-front drawers on Euro slides — more storage than most end tables twice its size, and the drawer boxes are the whole project.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End frame legs (short) | 4 | 1 1/2" × 1 1/2" × 12 3/4" | Pine | ☐ |
| End frame legs (tall) | 4 | 1 1/2" × 1 1/2" × 32" | Pine | ☐ |
| End panels | 2 | 3/4" × 12 3/4" × 32" | 3/4" plywood | ☐ |
| Drawer slide support cleats | 4 | 3/4" × 2 1/2" × 12 3/4" | Pine | ☐ |
| Front/back trim (support legs) | 4 | 1 1/2" × 1 1/2" × 32" | Pine | ☐ |
| Front trim between drawers Space exactly per the layout — this is what keeps the six drawer gaps even. | 4 | 3/4" × 1 1/2" × 32" | Pine | ☐ |
| Drawer box sides Size to the actual opening, not blindly to this number. | 12 | 3/4" × 2 1/2" × 16" | Pine | ☐ |
| Drawer box fronts/backs | 12 | 3/4" × 2 1/2" × 29 1/2" | Pine | ☐ |
| Drawer bottoms | 6 | 1/4" × 16" × 31" | 1/4" plywood | ☐ |
| Drawer faces Keep an even 1/8" gap on every side once hung. | 6 | 3/4" × 3 1/2" × 31 3/4" | Pine | ☐ |
| Tabletop boards Glue up on a flat surface, clamped, before attaching to the base. | 5 | 3/4" × 7 1/4" × 36 1/4" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet One and a half sheets needed — buy two. Rip into 15-3/4" wide strips with the grain. | 2 each | ☐ |
| Pine, 2x2, 8 ft | 3 each | ☐ |
| Pine, 1x2, 8 ft | 2 each | ☐ |
| Pine, 1x3, 8 ft | 6 each | ☐ |
| Pine, 1x4, 8 ft | 2 each | ☐ |
| Pine, 1x8, 10 ft | 1 each | ☐ |
| Pine, 1x8, 8 ft | 1 each | ☐ |
| Plywood, 1/4", 4x8 sheet Drawer bottoms. | 1 each | ☐ |
| Euro-style bottom-mount drawer slides The single biggest line item on this build. Buy quality — cheap slides are the most common reason a finished drawer feels bad. | 6 pair | ☐ |
| Caster wheels | 4 each | ☐ |
| Drawer knobs or handles | 6 each | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Self-tapping wood screws, 2" For attaching the top from underneath through the 2x2s. | 1 box | ☐ |
| Wood glue | 8 oz | ☐ |
| Wood filler | 1 each | ☐ |
| Sandpaper, 120 grit | 6 sheet |
| ☐ |
| Stain or paint | 1 quart | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.