48" Turned Leg Vanity — board plan

What to buy, and which parts come off which board.

Buy 8 boards at 8 ft.

3/4" × 19" — Plywood

1 board · 1.7 board feet (includes 15% for knots and defects) · 17% of the boards you buy used

Board 1 · 79 7/8" left over
15"
1. Leg end panel — 15"

3/4" × 15" — Plywood

2 boards · 9.2 board feet (includes 15% for knots and defects) · 54% of the boards you buy used

Board 1 · 22 3/4" left over
42"30"
1. Bottom shelf panel — 42"
2. Interior partitions — 30"
Board 2 · 64 7/8" left over
30"
1. Interior partitions — 30"

3/4" × 2 1/2" — Pine 1x3

3 boards · 3.4 board feet (includes 15% for knots and defects) · 81% of the boards you buy used

Board 1 · 10 3/4" left over
42"42"
1. Face frame stiles — 42"
2. Face frame stiles — 42"
Board 2 · 10 3/4" left over
42"42"
1. Face frame stiles — 42"
2. Face frame stiles — 42"
Board 3 · 34 1/2" left over
15"15"15"15"
1. Leg end trim — 15"
2. Leg end trim — 15"
3. Leg end trim — 15"
4. Leg end trim —

3/4" × 1 1/2" — Pine 1x2

2 boards · 1.5 board feet (includes 15% for knots and defects) · 90% of the boards you buy used

Board 1 · 10 3/4" left over
42"42"
1. Bottom shelf trim, front/back — 42"
2. Bottom shelf trim, front/back — 42"
Board 2 · 8 1/4" left over
15"15"14"14"14"14"
1. Bottom shelf trim — 15"
2. Bottom shelf trim — 15"
3. Face frame rails — 14"
4. Face frame rails — 14"
5. Face frame rails — 14"
6. Face frame rails — 14"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 19" — Plywood

Board 1 · 79 7/8" left over

3/4" × 15" — Plywood

Board 1 · 22 3/4" left over

Board 2 · 64 7/8" left over

3/4" × 2 1/2" — Pine 1x3

Board 1 · 10 3/4" left over

Board 2 · 10 3/4" left over

Board 3 · 34 1/2" left over

3/4" × 1 1/2" — Pine 1x2

Board 1 · 10 3/4" left over

Board 2 · 8 1/4" left over