NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A prefinished-plywood closet tower with a toekick base, fixed and adjustable shelving, and hardwood cleats for joining multiple towers side by side.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides Notch the bottom for the toekick. | 2 | 3/4" × 15 3/4" × 84" | 3/4" plywood (ripped strip) | ☐ |
| Top and bottom | 2 | 3/4" × 15 3/4" × 46 1/2" | 3/4" plywood (ripped strip) | ☐ |
| Toekick | 1 | 3/4" × 3 1/2" × 48" | 1x4, matching wood species | ☐ |
| Underneath support | 1 | 3/4" × 3 1/2" × 46 1/2" | 1x4, pine | ☐ |
| Dividers | 2 | 3/4" × 15 3/4" × 79" | 3/4" plywood (ripped strip) | ☐ |
| Back | 1 | 1/4" × 48" × 84" | 1/4" plywood, matching species | ☐ |
| Large fixed shelves | 2 | 3/4" × 15 3/4" × 23" | 3/4" plywood (ripped strip) | ☐ |
| Small fixed shelves | 4 | 3/4" × 15 3/4" × 11" | 3/4" plywood (ripped strip) | ☐ |
| Adjustable shelves | 12 | 3/4" × 15 3/4" × 10 3/4" | 3/4" plywood (ripped strip) | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, ripped into 15-3/4"-wide strips, edge banded on the front, matching species Roughly two sheets per organizer if the layout is planned well. | 2 sheet | ☐ |
| 1/4" plywood, matching species, for the back | 1 sheet | ☐ |
| 1x4 board, 4 ft, matching wood species The toekick. | 1 each | ☐ |
| 1x4 board, 8 ft, pine (Pine) The underneath support — a cheaper species is fine since it's hidden. | 2 each | ☐ |
| 1x2 board, 8 ft, matching wood species Installed under the shelf fronts when joining towers together. | 1 each | ☐ |
| Finish nails, 3/4" | 60 each | ☐ |
| Pocket-hole screws, 1-1/4" | 40 each | ☐ |
| Shelf pins | 24 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.