NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A trestle-style dining table on compound-beveled 2x4 legs, tied together by a 2x4 truss brace under a 2x6 plank top — distinct from this catalog's post-and-beam bar-height truss table.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Main legs Top edge beveled at 10°, bottom outside corners cut off at 45°. | 2 | 1 1/2" × 3 1/2" × 38 1/2" | 2x4, 8 ft | ☐ |
| Leg uprights One end cut at 10° angle, long point measurement — two cut one way, two mirrored. | 4 | 1 1/2" × 3 1/2" × 28" | 2x4, 8 ft | ☐ |
| Leg cross braces Long point to long point, both ends cut at 10° off square, ends not parallel. | 2 | 1 1/2" × 3 1/2" × 29 1/4" | 2x4, 8 ft | ☐ |
| Tabletop planks | 7 | 1 1/2" × 5 1/2" × 83 1/2" | 2x6, 8 ft | ☐ |
| Tabletop breadboard supports Cut to fit. | 2 | 1 1/2" × 1 1/2" × 38 1/2" | 2x2, 8 ft | ☐ |
| Truss center beam | 1 | 1 1/2" × 3 1/2" × 72" | 2x4, 8 ft | ☐ |
| Truss braces Long point to short point, both ends cut at 50° off square, ends parallel. | 2 | 1 1/2" × 3 1/2" × 29 7/8" | 2x4, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft | 5 each | ☐ |
| 2x6, 8 ft | 7 each | ☐ |
| 2x2, 8 ft | 1 each | ☐ |
| Pocket hole screws, 2-1/2" | 50 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.