1x12 Pine Board Dress-Up Wardrobe

Mark out the profile on both 1x12 side pieces and cut with a jigsaw. Sand the cut edges until smooth and the two sides match each other closely — a mismatched pair is the one thing that gives away a rushed cut on this build.

Cut both shelves from the remaining 1x12 boards to exactly the same length. Drill pocket holes at the 3/4" setting on each end (three per end). Attach the upper shelf first, leaving 8-3/4" of clearance underneath, pocket holes facing down. Then attach the bottom shelf. Use 1-1/4" pocket hole screws.

Cut the 1x3 trim boards to shape with a jigsaw if you want a decorative edge, then attach with pocket holes at the ends and 1-1/4" brad nails and glue to the shelves. To avoid visible pocket holes on the most visible top trim piece, consider attaching it with finish nails or screws instead.

Install the closet rod, hooks, and a small mirror. Bins sized to fit a standard closet-bin brand slide neatly into the lower shelf if extra organization is wanted.