18" Doll Beverage Stand — board plan

What to buy, and which parts come off which board.

Buy 5 boards at 8 ft.

3/4" × 3 1/2" — Pine

1 board · 0.2 board feet (includes 15% for knots and defects) · 9% of the boards you buy used

Board 1 · 87 3/8" left over
7 1/2"
1. Window sill — 7 1/2"

3/4" × 2 1/2" — Pine

2 boards · 1.5 board feet (includes 15% for knots and defects) · 53% of the boards you buy used

Board 1 · 3 3/4" left over
10"10"10"10"10"10"7 1/2"7 1/2"7 1/2"7 1/2"
1. Counter frame short pieces — 10"
2. Counter frame short pieces — 10"
3. Counter frame short pieces — 10"
4. Counter frame short pieces — 10"
5. Counter frame short pieces — 10"
6. Counter frame short pieces — 10"
7. Wall pieces — 7 1/2"
8. Wall pieces — 7 1/2"
9. Wall pieces — 7 1/2"
10. Wall pieces — 7 1/2"
Board 2 · 87 3/8" left over
7 1/2"
1. Wall pieces — 7 1/2"

3/4" × 1 1/2" — Pine

2 boards · 0.9 board feet (includes 15% for knots and defects) · 53% of the boards you buy used

Board 1 · 1 1/8" left over
22 1/2"22 1/2"22 1/2"10"7 1/2"4"4"
1. Counter frame long pieces — 22 1/2"
2. Counter frame long pieces — 22 1/2"
3. Counter frame long pieces — 22 1/2"
4. Counter frame short piece — 10"
5. Wall piece — 7 1/2"
6. Roof cap, single bevel end — 4"
7. Roof cap, single bevel end — 4"
Board 2 · 89 3/4" left over
2 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 3 1/2" — Pine

Board 1 · 87 3/8" left over

3/4" × 2 1/2" — Pine

Board 1 · 3 3/4" left over

Board 2 · 87 3/8" left over

3/4" × 1 1/2" — Pine

Board 1 · 1 1/8" left over

Board 2 · 89 3/4" left over