Window Seat Storage Bench from One Sheet of Plywood — board plan

3/4" × 15 3/4" — 3/4" plywood, ripped to 15-3/4" strips, full sheet (AC or better, hardwood, or MDF)

2 boards · 23.5 board feet (includes 15% for knots and defects) · 82% of the boards you buy used

• Top at 95 1/4" — Longer than a 96″ board once the end trim is taken off.

1. Board 1 · 2 3/8" left over

   30 3/4"30 3/4"30 3/4"
   1. Shelves — 30 3/4"
   2. Shelves — 30 3/4"
   3. Shelves — 30 3/4"

2. Board 2 · 32 1/2" left over

   15 1/2"15 1/2"15 1/2"15 1/2"
   1. Dividers — 15 1/2"
   2. Dividers — 15 1/2"
   3. Dividers — 15 1/2"
   4. Dividers — 15 1/2"

3/4" × 3 1/4" — Base moulding, 3-1/4 in, 8 ft

0 boards · 1.9 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

• Base moulding trim at 95 1/4" — Longer than a 96″ board once the end trim is taken off.

3/4" × 1 1/2" — 1x2, 8 ft

1 board · 0.8 board feet (includes 15% for knots and defects) · 98% of the boards you buy used

1. Board 1 · 2 3/8" left over

   30 3/4"30 3/4"30 3/4"
   1. Top support trim — 30 3/4"
   2. Top support trim — 30 3/4"
   3. Top support trim — 30 3/4"

3/4" × 3/4" — Cove moulding, 3/4 in, 8 ft

0 boards · 0.4 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

• Top cove trim at 95 1/4" — Longer than a 96″ board once the end trim is taken off.

1/4" × 95 1/4" — 1/4" plywood or hardboard, panel for back

1 board · 3.1 board feet (includes 15% for knots and defects) · 18% of the boards you buy used

1. Board 1 · 78 5/8" left over

   16 1/4"
   1. Back panel — 16 1/4"