Planter Box with Attached Trellis

Cut the twelve cedar side boards and the 1x2 connector pieces to length, then assemble two side panels and a front/back panel from them.

Join all four planter walls together, then cut and attach the two cedar bottom boards, drilling drainage holes before you're done.

Cut the 2x6 base rails and attach the assembled planter box on top of them.

Cut and miter the 2x4 top trim pieces at 45 degrees and attach them around the top edge of the planter.

Cut the 2x2 trellis uprights and cross braces and assemble the lattice trellis frame with the 1x2 slats, then attach the finished trellis to the back of the planter.