Toy Bunny Hutch — board plan

What to buy, and which parts come off which board.

Buy 4 boards at 8 ft.

3/4" × 7 1/4" — 1x8

1 board · 1.5 board feet (includes 15% for knots and defects) · 37% of the boards you buy used

Board 1 · 60 1/2" left over
10 1/4"9"9"5 3/4"
1. Top — 10 1/4"
2. Sides — 9"
3. Sides — 9"
4. Sloped front — 5 3/4"

3/4" × 3/4" — 1x1

1 board · 0.2 board feet (includes 15% for knots and defects) · 49% of the boards you buy used

Board 1 · 48 1/2" left over
5 1/4"5 1/4"5 1/4"5 1/4"3"3"3"3"3"3"3"3"
1. Door stiles — 5 1/4"
2. Door stiles — 5 1/4"
3. Door stiles — 5 1/4"
4. Door stiles — 5 1/4"
5. Door bars — 3"
6. Door bars — 3"
7. Door bars — 3"
8. Door bars —

1/2" × 8" — 1/2 in plywood

1 board · 0.4 board feet (includes 15% for knots and defects) · 14% of the boards you buy used

Board 1 · 82 5/8" left over
12 1/4"
1. Bottom/floor — 12 1/4"

1/4" × 5 1/4" — 1/4 in plywood

1 board · 0.1 board feet (includes 15% for knots and defects) · 13% of the boards you buy used

Board 1 · 83 1/8" left over
11 3/4"
1. Back panel — 11 3/4"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 7 1/4" — 1x8

Board 1 · 60 1/2" left over

3/4" × 3/4" — 1x1

Board 1 · 48 1/2" left over

1/2" × 8" — 1/2 in plywood

Board 1 · 82 5/8" left over

1/4" × 5 1/4" — 1/4 in plywood

Board 1 · 83 1/8" left over