Toy Barn with Stables

Cut the floor piece from the 24" x 48" plywood panel first, then the roof panel piece, saving every scrap. Cut the roof panel piece down into the smaller roof pieces. Rip strips of 1/4" plywood for the railing, or substitute craft wood strips if you can't rip pieces this thin.

Build six identical outer wall sections from the 1x2 verticals and angled roof pieces.

Add roof pieces to two sets of the outer walls, forming the barn's two end structures.

For the center wall, add the stall divider now if wanted — it's much harder to add once the wall is boxed in on both sides.

Attach the floor to one outer wall, then attach the other outer wall, then position the remaining center wall in the middle and attach.

Add railing to the outside, then to the front and back. Attach the roof panels — there will be a slight intentional overhang on the ends. Sand thoroughly and finish.