Tiny House Dollhouse for 12" Dolls — board plan

What to buy, and which parts come off which board.

Buy 10 boards at 8 ft.

1 1/2" × 3 1/2" — Scrap 2x4

1 board · 0.5 board feet (includes 15% for knots and defects) · 13% of the boards you buy used

Board 1 · 83 5/8" left over
11 1/4"
1. Couch/bed base — 11 1/4"

3/4" × 11 1/4" — Pine, 1x12

1 board · 5.3 board feet (includes 15% for knots and defects) · 83% of the boards you buy used

Board 1 · 16 5/8" left over
46"16"16"
1. Bottom — 46"
2. Outer walls, tall — 16"
3. Outer walls, tall — 16"

3/4" × 5 1/2" — Pine, 1x6

1 board · 1.7 board feet (includes 15% for knots and defects) · 56% of the boards you buy used

Board 1 · 42" left over
16"16"11 1/4"9 1/4"
1. Outer walls, short — 16"
2. Outer walls, short — 16"
3. Loft support — 11 1/4"
4. Inner wall — 9 1/4"

3/4" × 3 1/2" — Scrap 1x4

1 board · 0.2 board feet (includes 15% for knots and defects) · 13% of the boards you buy used

Board 1 · 83 5/8" left over
11 1/4"
1. Couch/bed seat — 11 1/4"

3/4" × 2 1/2" — Scrap 1x3

1 board · 0.3 board feet (includes 15% for knots and defects) · 24% of the boards you buy used

Board 1 · 72 3/4" left over
11"11"
1. Wheel supports — 11"
2. Wheel supports — 11"

3/4" × 1 1/2" — Scrap 1x2

1 board · 0.1 board feet (includes 15% for knots and defects) · 13% of the boards you buy used

Board 1 · 83 5/8" left over
11 1/4"
1. Couch/bed top — 11 1/4"

3/4" × 3/4" — Pine, 1x1

1 board · 0.0 board feet (includes 15% for knots and defects) · 5% of the boards you buy used

Board 1 · 91 1/2" left over
3/4"3/4"3/4"3/4"
1. Couch/bed legs — 3/4"
2. Couch/bed legs — 3/4"
3. Couch/bed legs — 3/4"
4. Couch/bed legs — 3/4"

1/2" × 4" — Plywood, 1/2"

1 board · 0.3 board feet (includes 15% for knots and defects) · 18% of the boards you buy used

Board 1 · 78 1/2" left over
4"4"4"4"
1. Wheels — 4"
2. Wheels — 4"
3. Wheels — 4"
4. Wheels — 4"

1/4" × 38" — Plywood

1 board · 1.0 board feet (includes 15% for knots and defects) · 15% of the boards you buy used

Board 1 · 81 3/8" left over
13 1/2"
1. Side panel — 13 1/2"

1/4" × 36" — Plywood

1 board · 1.2 board feet (includes 15% for knots and defects) · 19% of the boards you buy used

Board 1 · 78 1/8" left over
16 3/4"
1. Back panel — 16 3/4"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 3 1/2" — Scrap 2x4

Board 1 · 83 5/8" left over

3/4" × 11 1/4" — Pine, 1x12

Board 1 · 16 5/8" left over

3/4" × 5 1/2" — Pine, 1x6

Board 1 · 42" left over

3/4" × 3 1/2" — Scrap 1x4

Board 1 · 83 5/8" left over

3/4" × 2 1/2" — Scrap 1x3

Board 1 · 72 3/4" left over

3/4" × 1 1/2" — Scrap 1x2

Board 1 · 83 5/8" left over

3/4" × 3/4" — Pine, 1x1

Board 1 · 91 1/2" left over

1/2" × 4" — Plywood, 1/2"

Board 1 · 78 1/2" left over

1/4" × 38" — Plywood

Board 1 · 81 3/8" left over

1/4" × 36" — Plywood

Board 1 · 78 1/8" left over