Skip to content
Notch
← Back to the plan

Southwestern Style Bench — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

1" × 1"

1 board · 0.6 board feet (includes 15% for knots and defects) · 81% of each board consumed

  1. Board 1 · 18 1/2" left over

    1. Rear Legs - Oak — 20"
    2. Rear Legs - Oak — 20"
    3. Front Legs - Oak — 18"
    4. Front Legs - Oak — 18"

3/4" × 13"

1 board · 3.7 board feet (includes 15% for knots and defects) · 51% of each board consumed

  1. Board 1 · 46 7/8" left over

    1. Seat - Oak — 48"

3/4" × 10"

1 board · 2.6 board feet (includes 15% for knots and defects) · 47% of each board consumed

  1. Board 1 · 50 7/8" left over

    1. Back - Oak — 44"

3/4" × 4"

1 board · 1.6 board feet (includes 15% for knots and defects) · 70% of each board consumed

  1. Board 1 · 28 5/8" left over

    1. Front Apron - Oak — 44"
    2. Sides - Oak — 11"
    3. Sides - Oak — 11"

3/4" × 2"

1 board · 0.3 board feet (includes 15% for knots and defects) · 26% of each board consumed

  1. Board 1 · 70 3/4" left over

    1. Seat Braces - Oak — 12"
    2. Seat Braces - Oak — 12"

3/4" × 1"

1 board · 0.2 board feet (includes 15% for knots and defects) · 32% of each board consumed

  1. Board 1 · 64 7/8" left over

    1. Seat Support - Oak — 30"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.