Skip to content
Notch
← Back to the plan

Simple Wooden Christmas Sled — board plan

What to buy, and which parts come off which board.

Buy 3 boards at 8 ft.

3/4" × 11"

1 board · 1.4 board feet (includes 15% for knots and defects) · 24% of each board consumed

  1. Board 1 · 72 7/8" left over

    1. Sled Seat, 1x12 @ 22" long — 22"

3/4" × 2"

1 board · 0.6 board feet (includes 15% for knots and defects) · 56% of each board consumed

  1. Board 1 · 42 1/2" left over

    1. Sled Front Brace, 1x3 @ 16" long — 16"
    2. Sled Runners, 1x3 @ 12 3/4" long — 12"
    3. Sled Runners, 1x3 @ 12 3/4" long — 12"
    4. Sled Runners, 1x3 @ 12 3/4" long — 12"

3/4" × 1"

1 board · 0.4 board feet (includes 15% for knots and defects) · 64% of each board consumed

  1. Board 1 · 34 3/4" left over

    1. Sled Rails, 1x2 @ 30" long (ends mitered 45 degrees) — 30"
    2. Sled Rails, 1x2 @ 30" long (ends mitered 45 degrees) — 30"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.